• For Bulk Order : 9717003393 011-45631920 9717003395 | : support@powerfactorshop.com
! Wide Range of Electrical Products !
Socomec ATyS S/Sd from 40 to 125 A- Remotely operated Transfer Switches (RTSE)
* The original products may vary from the picture

Socomec 125A 4 pole (4) ATyS S/Sd Remotely operated Transfer Switches (RTSE)

SKU Code : 95034012SL

Mfr Part No. : 95034012SL

HSN Code: : 8536

Weight : 5000.000 in Gram (per Bag)

Brand : Socomec

 

Tecnical Specification

  • Model ATyS S
  • Pole 4 Pole

Product Detail

Ampere :

  • Rs. 25266
  • Rs. 17686
30.00% OFF

Quantity

Pieces

Total (Rs.)

0

Description Qty Unit Price Total
Socomec 40A 4 Pole(4p) ATyS S Remotely operated Transfer Switches (RTSE)
SKU Code : 95034004SL
Mfr Part No. :95034004SL
Ampere :40A
Pieces
Rs. 18349 Rs. 12844
30.00% OFF
Rs. 0
Socomec 63A 4 Pole (4p) ATyS S/Sd Remotely operated Transfer Switches (RTSE)
SKU Code : 95034006SL
Mfr Part No. :95034006SL
Ampere :63A
Pieces
Rs. 19372 Rs. 13560
30.00% OFF
Rs. 13560.00
Socomec 100A 4 pole (4) ATyS S/Sd Remotely operated Transfer Switches (RTSE)
SKU Code : 95034010SL
Mfr Part No. :95034010SL
Ampere :100A
Pieces
Rs. 23582 Rs. 16507
30.00% OFF
Rs. 0
Socomec 125A 4 pole (4) ATyS S/Sd Remotely operated Transfer Switches (RTSE)
SKU Code : 95034012SL
Mfr Part No. :95034012SL
Ampere :125A
Pieces
Rs. 25266 Rs. 17686
30.00% OFF
Rs. 0
Sub Total
(* Taxes, Freights, Insurances will be charged extra.)
Details
 
ATyS S products are 4 pole remotely operated transfer switches with positive break indication. They enable the on-load transfer of two three-phase supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.
 
Advantages
Extensive power supply range
The ATyS S is available in four supply versions, each with a broad range (+/-30%). The four versions are:
• 12 VDC power supply.
• 24/48 VDC power supply.
• 230 VAC single power supply.
• 2 x 230 VAC dual power supply.
 
Safety and reliability
ATyS S products use stable position technology, ensuring constant pressure on the contacts and preventing premature faults. In addition, they do not require a power supply to maintain position, thus protecting their loads from voltage fluctuations.
 
Easy integration
ATyS S products can be easily installed inside enclosures. Their design, and in particular their compact size, enables integration within most 200 mm deep enclosures.
 
Simplified maintenance
Maintenance can be carried out easily under load, with manual operation still available. The control and motorisation section can be replaced simply by removing 4 screws, with no work required on the installation cabling.
 
ATyS d S: Dual power supply
In addition to the functions offered by the ATyS S, the ATyS d S incorporates supply redundancy without the need for additional wiring.This is obtained by integrating a double
supply (2 independent supplies) directly within the product.
  • Socomec ATyS S/Sd Remotely operated Transfer Switches (RTSE)


    • ATyS S - ATyS d S
  • Model ATyS S
  • Pole 4 Pole

Related Category

subscribe to our newsletter